Products

Garage Guard ™ Is a new generation, water-based catalyzed epoxy, which offers performance equal to traditional solvent based epoxy systems. Low odor, non-toxic. Won't lift existing coatings.USDA approved Garage Guard™ is a specially designed epoxy coating that resists garage chemical spills  like  grease , brake fluid , gasoline, anti-freeze , etc.

By using Garage Guard™ on your Garage or Basement floors these spills wipe right up with a rag or spray cleaner.  Your garage stays looking clean and safer for your family to walk on. Studies also show that a neat and Clean Garage Floor adds value to your home.Garage Guard™ comes in 2 Standard colors :  Showroom Gray and Desert Sand.Plus.... Garage Guard™ can be mixed to hundreds of custom colors.

To give your floor a multi-colored look use Garage Guard™ Decorative Flakes during application.  Sprinkled on the surface, Garage Guard Decorative Flakes add both a decorative look and provide a slip resistant finish. 

SUGGESTED USES: Garage Floors Basement Floors, Other Interior Concrete Surfaces

Theoretical coverage at one mil dry is 745 square feet per gallon. Material losses during mixing and application will vary and must be taken into consideration when estimating job requirements.

Dries to touch in 2 hours and to handle in 2 hours. Can be re-coated in 24 hours. Floor can be walked on after final coat has dried for 24 hours. Can be parked on after 72 hours.Do not apply if material, substrate or ambient temperature is below 50°F (10°C) or above 90°F(43°C). Relative humidity should be below 90%.

Mix Ratio: 3:1 by Volume. Stir each component thoroughly with a separate clean paddle. Pour total amount of Component "B" in the Component "A" container. Stir mixture of Component "A"and "B" thoroughly and induct 30 minutes. Mixed material must be applied within 4 -6 hours.